Bullseye - Amber Lustre Transparent - Striker
• Approximate Diameter: 4-6mm
• Approximate Length: 14"-16"
• COE: 90 Compatible
Torch: This style may not reveal (or strike to) its target color until fired. A reducing glass that can develop a metallic sheen with an amber cast. Begin by working Amber Lustre Transparent in a neutral flame. When ready to develop a metallic sheen, the glass should be relatively cool (no visible heat) and stable on the mandrel. Create a reduction atmosphere by turning the propane (fuel) up and watch for the surface of the glass to become metallic. Once this has happened, the piece should be put into an annealing kiln. This is a finishing step. If the metallic surface is reintroduced to a neutral flame, it will dissipate. It can be brought out again by returning it to a reduction atmosphere. When molten, this glass has a low viscosity, and can be quite soft, which may result in a blurred edge where it meets other glasses. In addition, the process of reducing the glass can cause a metallic sheen over areas of glass immediately adjacent to this style.
Kiln: Not recommended for kilnforming.
Amber Lustre Transparent is a relatively heavy glass. Labeling is encouraged, because Amber Lustre Transparent stays deceptively clear until reduced.