Lapis Blue OCCASIONAL Rod - Glass Alchemy
Working Tip: Heat slowly to raise the core temperature. Once the heat base is established, this color can be worked very hot and any air bubbles that popped during the preheat will smooth out. Getting this color white hot will cause excessive gas release that can not be repaired and should therefore be avoided.
Artist Description by Mike Shelbo:
In comparison to the other opaque colors in the Glass Alchemy palette, Lapis is a bit different in its working characteristics. First of all, it is quite stiff when being manipulated and takes a bit longer than other colors to soak heat into its core. An encasement in clear will allow for more intense heating closer to the face of your torch. Working Lapis without encasement requires a little extra patience to achieve a beautiful end result of a deep opaque violet blue. Working with a neutral flame is important. Too much propane in your mix will leave graying in patches and streaks. Lapis is dense and holds its color well in stringers and when blown thin. The stiffness of this color allows it to have uses in some applications where that characteristic would be helpful in workability and or design.
Occasional Quality Rod does not meet the Glass Alchemy first quality standards and may consist of rods varying in length and diameter. The glass may have slight imperfections such as deviations in color, stones and/or air. This glass was made with love and care at Glass Alchemy, but it did not make the cut and is now looking for a good home.