Small Pyrometer w/ Thermocoupler - Jen-Ken
Please note: Pyrometer hole in kiln will need to be reamed out for pyrometer to fit.
This Small Pyrometer is good to 2000° F and has a rigid 14 gauge thermocoupler attached. It is designed to be used in a peephole plug and to have some of the supplied fiber blanket packed around the probe to hold it in place. It will need to be packed form the inside and the outside to support the weight.
The probe needs to stick into the kiln at least one inch and outside the kiln at least 1"-2" inches to keep the plastic housing away from the heat as much as possible. The metal of the meter and thermo can never touch the metal of the kiln or it will read wrong.