Bethlehem STACKS Torch - Starter Kit #404
Please Note: Your order may have variations in product's styles and colors from the above image.
The STACKS bench burner was designed specifically to fill the gap between the Alpha burner and the Bravo burner. Combine it with the everything below and you'll be well on your way to setting up a complete studio.
The starter kit includes:
- Oxygen Regulator
- Fuel Gas Regulator
- Oxygen and Fuel Y Connectors
- 1/4 " x 12.5' T-Grade Oxy/Fuel Hose
- Oxygen and Fuel Gas Flashback Arrestors
- Tungsten Carbide Scoring Blade
- Wheeled Glass Nippers
- 2" x 3" Graphite Paddle
- 1/4" Graphite Rod
- 1/2" Graphite Rod
- Set of 6", 8", & 12" Tweezers
- Wire Grabbers - These large holding fingers (6 wires) open to approximately 4" and close down to grasp objects as small as 4mm. Lightweight, easy to handle, 1 foot long with locking setscrew.
- Phillips - Model 533 - BoroTruView 3.0
- Tool and Rod Rest
- And of course, the STACKS bench Burner.
After two years of R&D Bethlehem has created the perfect in-between torch for both the beginner and the experienced flame worker! The STACKS includes: the Top Mount “Sharp Flame” surface mix burner, the Bottom Mount “Bravo”-sized surface mix burner, the unique and adjustable STACKS base, the Bethlehem Burners torch cleaning kit, and the Bethlehem Burners “Lifetime Factory Warranty.”
So makes The STACKS special? Versatility!
Each burner is constructed primarily of stainless steel and is equipped with Bethlehem Burners’ one-of-a-kind, stainless steel modular needle valves. Each burner comes with its own B-fitting gas and oxygen hose connections, making each burner a complete and separate torch unto itself.
The Top Mount (STACKS I) is similar to our Alpha torch but produces a sharper flame almost identical to the center fire flame of Bethlehem’s famous PM2D Bench Burner. This “Sharp Flame” has a longer center gas candle, which attracts the outer gas jets and oxygen in towards itself. The longer center candle creates a sharper and slightly more driving flame excellent for fine detail work and fuming.
The Bottom Mount (STACKS II) produces the same flame width and BTU output as the outer fire ring of the Bravo. Unlike the Bravo torch, the STACKS II does not have a center fire. This torch is perfect for medium hollow work, stress-free handling of sensitive colors, mid-sized (2”- 2.25”) solid marbles and gentle, even heating for pulling points.
Both the Top (STACKS I) and Bottom (STACKS II) Mounts work wonderfully with oxygen concentrators! Just like the Alpha and Bravo torches, these burners excel when fueled with a low-pressure system, making them the perfect torches for concentrators.
STACKS I – 8 LPM O2, 8 PSI
STACKS II – 20 LPM O2, 8 PSI