Starter Kit #500 - GTT Bobcat Torch
Details
Please Note: Your order may have variations in product's styles and colors from the above image.
The Bobcat is designed for a wide versatility of flame characteristics. The Bobcat is a standard surface mix torch with 7 jets. The Bobcat is capable of flame sizes from a 2" long pinpoint flame for detail work and finite heating to a 9/16" diameter, 13" long flame for 1.5" solid borosilicate glasswork. The Bobcat can work up to 3" borosilicate pendant. It is great for making beads, marbles and sculptures in soft or hard glass.
The flame characteristics of the Bobcat make it a very efficient, clean burning torch that makes the most difficult colors and effects easy to work and control. The penetrating heat of the flame make borosilicate beads and pendants easy without any change to the torch setup.
The Bobcat runs very well on 5 LPM 5 PSI concentrators with optimal performance on a 8 LPM concentrator. Fuel pressures can be run as low as 1/4 PSI on Natural gas or Propane. The Bobcat makes the most heat out of the available fuel and oxygen for an extremely clean flame with no carbon on the torch when run properly. The Bobcat is not limited to small concentrator use, it does extremely well on 10 LPM concentrators as well as using tanked oxygen. This means that it maximizes the output of smaller oxygen concentrators and is very efficient on tanked oxygen too!
The Bobcat comes standard with male “B” fittings and in-line filter screens to easily connect to grade “T” hose with “B” fittings. The stainless steel base has 4 holes for securing the torch to the work table, and can be used as a forming and shaping tool for hot glass pieces. Also included are complete instructions and cleaning wires.
GTT Bobcat Torch Starter Kit includes:
- GTT - Bobcat Torch
- Oxygen Regulator
- Fuel / Gas Regulator
- Oxy/Fuel T-Grade Hose w/ B Fittings - 1/4" Inner Dia. x 12.5'
- Flashback Arrestors - Set of Two, One Oxy & One Fuel Gas
- Tungsten Carbide Scoring Knife
- Wheeled Glass Nippers
- 2" x 3" Paddle x 8.5" Handle - High Quality Graphite Paddle
- Copperclad Graphite Rod - 1/4" x 12"
- Copperclad Graphite Rod - 1/2" x 12"
- 8" Tweezers - Serrated
- 10" Tweezers - Serrated
- 12" Tweezers - Serrated
- Economy Claw Grabbers w/ Set Screw
- Tool and Rod Rest - 7.5" w/ 10 Slots
- Mountain Glasses - Didymium - Black Frame
The Bobcat is designed for a wide versatility of flame characteristics. The Bobcat is a standard surface mix torch with 7 jets. The Bobcat is capable of flame sizes from a 2" long pinpoint flame for detail work and finite heating to a 9/16" diameter, 13" long flame for 1.5" solid borosilicate glasswork. The Bobcat can work up to 3" borosilicate pendant. It is great for making beads, marbles and sculptures in soft or hard glass.
The flame characteristics of the Bobcat make it a very efficient, clean burning torch that makes the most difficult colors and effects easy to work and control. The penetrating heat of the flame make borosilicate beads and pendants easy without any change to the torch setup.
The Bobcat runs very well on 5 LPM 5 PSI concentrators with optimal performance on a 8 LPM concentrator. Fuel pressures can be run as low as 1/4 PSI on Natural gas or Propane. The Bobcat makes the most heat out of the available fuel and oxygen for an extremely clean flame with no carbon on the torch when run properly. The Bobcat is not limited to small concentrator use, it does extremely well on 10 LPM concentrators as well as using tanked oxygen. This means that it maximizes the output of smaller oxygen concentrators and is very efficient on tanked oxygen too!
The Bobcat comes standard with male “B” fittings and in-line filter screens to easily connect to grade “T” hose with “B” fittings. The stainless steel base has 4 holes for securing the torch to the work table, and can be used as a forming and shaping tool for hot glass pieces. Also included are complete instructions and cleaning wires.
GTT Bobcat Torch Starter Kit includes:
- GTT - Bobcat Torch
- Oxygen Regulator
- Fuel / Gas Regulator
- Oxy/Fuel T-Grade Hose w/ B Fittings - 1/4" Inner Dia. x 12.5'
- Flashback Arrestors - Set of Two, One Oxy & One Fuel Gas
- Tungsten Carbide Scoring Knife
- Wheeled Glass Nippers
- 2" x 3" Paddle x 8.5" Handle - High Quality Graphite Paddle
- Copperclad Graphite Rod - 1/4" x 12"
- Copperclad Graphite Rod - 1/2" x 12"
- 8" Tweezers - Serrated
- 10" Tweezers - Serrated
- 12" Tweezers - Serrated
- Economy Claw Grabbers w/ Set Screw
- Tool and Rod Rest - 7.5" w/ 10 Slots
- Mountain Glasses - Didymium - Black Frame